Step By Step Process For iRobot Roomba Setup

Step By Step Process For iRobot Roomba Setup

Cleaning your homes manually can be a hectic task. Fortunately, iRobot Roomba can help you complete them easily. If you have purchased a new roomba setup for your home, learning about how to set it up becomes important. This blog will walk you through the steps for the iRobot Roomba Setup process in no time.

Where To Start iRobot Roomba Setup Process?

When you’re pondering how to begin the iRobot roomba setup, you’ll be required to prepare your equipment for use by following these steps:

  • Set up the iRobot charger for your home base flatly against the floor. Make sure that the area is clear of clutter.
  • Take just one side of your cord and connect it to your Home Base. Connect the other end to an electrical outlet and switch it on.
  • Place the iRobot Roomba setup on the base of the home so that the contacts for charging the metal on the base of your home are in sync with the ones underneath the robot in the room.
  • After that, let the setup turn on and then let it settle into the normal operating condition.
  • Then you need to install the iRobot home application from your respective device’s app store. The app lets you make use of your smartphone to take control of your Roomba robot. If the application is already installed, ensure that it’s on the most recent version.
  • Once installed and downloaded, connect the robot to your wifi network. In order to do that, launch the iRobot Home App and it will guide you through the steps for connecting to it. You’ll need your network’s SSID as well as the password to the network on hand, ensure that you set it up prior to.

When your roomba device has been connected to the WiFi network and you be notified “You are now connected to Roomba”. The Wi-Fi LED on the device will become a solid white. Roomba is now configured fully and is accessible through Roomba’s iRobot Home App.

Cleaning The House

There are two methods to begin cleaning using the Roomba robot. But it is essential to understand that your robot’s cleaning device has a battery that is only half charged. If you start the cleaning process without fully charging the battery might return to its home base for a recharge earlier than compared to a full cleaning cycle.

In one cleaning cycle, Roomba cleans your entire home. If the battery becomes depleted after completing a cleaning process, your iRobot Roomba setup will automatically return to its home base to charge itself. After the battery is recharged, it will resume immediately, thus concluding the cleaning process. If the base is not accessible, the roomba isn’t able to recharge and will return to its original location and complete the cycle.

To begin a cleaning cycle, here are the steps you should follow:

  • Launch the iRobot Home app and hit the button to clean.
  • The Roomba’s Clean button has to be pressed on the robot one time to get it started. Then, hit Clean again to begin an entire cleaning cycle.

Your iRobot roomba has now been set up and you can leave all your worries about home maintenance behind.

Need more help with the iRobot Roomba setup? Connect with the team now!