How To Add Linksys Mesh Router To Your Network?

Your primary priority should be correctly configuring your Linksys Velop. To configure the Linksys Velop, you must first log in. You must therefore be aware of the correct Linksys Velop setup procedure. You only need to log into the Velop’s online interface to configure it. Thus, you must know how to add Linksys mesh router.

One of the best mesh networks ever made is the Linksys Velop. In addition to excellent network coverage, this Velop offers a variety of features. Using this Velop, you may eradicate all dead zones in your house. As a result, in order to complete the Linksys Velop setup, you must log in.

If you require help to add Linksys mesh router to your network, we’ve got you. We are here with this post to help users set up their Linksys WiFi mesh router. This post will explain the proper process for the setup. We will also discuss the Linksys router not working issue and the troubleshooting methods.

Steps to Add Linksys Mesh Router to Your Network

In this section, we will explain how to add Linksys Mesh router. To set up the Linksys mesh router, you just need to install the Linksys app. Through the app, you can set up the Linksys mesh router accurately. The steps for the setup are as follows:

To begin with, Install the Linksys app on your smartphone.
Both the Play Store and the App Store have the app.
Open the app now to continue setting up Velop.
Now, make sure that the parent node is turned on and linked to the modem.
Next, select Setup a New WiFi Network from the app’s menu.
To add it to the app, choose the appropriate model and the Velop network.
The Bluetooth on your smartphone must then be turned on.
Hereon, if the Velop is turned on and linked, you can continue.
You can also set up the nodes once you have completed the wiring procedures.
Tap Node Light is Solid in the app when you see a purple light on the nodes.
After that, it may take some time for the Velop to check the internet and ISP settings.
You will have to manually configure the internet settings if necessary.
The Velop’s settings must then be accurately configured via the app.
Afterward, you must log in with your account information.
You can create an account through the app if you don’t already have one.
At last, precisely add the nodes to the app and customize the parameters.

These are the steps to add Linksys mesh router to your network. Once you are done with the setup, you can relocate the Linksys nodes accordingly. Now, you can start using the Linksys Velop by connecting your device to the router’s network. If the Linksys router not connecting or working, keep reading ahead.

How to Fix the Linksys Router Not Working and Connecting?

Sometimes, due to several reasons, you can have trouble accessing the internet from your Linksys Velop. But it’s nothing to worry about, as there are various methods you can use. You can try the following techniques to resolve the Linksys router not working issue:

Examine the Power Source

For the Linksys Velop to operate properly, it needs a reliable power source.
The nodes won’t operate as effectively if there is a poor power source.
As a result, following setup, you need to plug the nodes into an outlet.
You must now plug the node into an outlet if you didn’t before.
Additionally, you must plug them into another socket if the present one isn’t working.
This should fix the Linksys router not connecting issue.

Power Cycle the Linksys Velop

The Linksys router connecting issue can occur because of an internal problem.
To resolve the Linksys node issue, you can restart the router.
Start by unplugging and turning off the Linksys Velop.
Now wait a while with it in that position.
You can turn it back ON after a little while.

Reduce the Distance

The distance between the Linksys node and the router is the most frequent issue.
When there’s too much distance between the devices, they will have trouble connecting.
In order to connect the node and the router, you can alternatively use an Ethernet cable.
For a seamless connection, locate the router within the router’s coverage area.
This should troubleshoot the Linksys router not working issue.

Reset the Linksys Velop

If none of these methods are working, you must reset the device.
The reset will fix all glitches and bugs within the Linksys Velop.
Just locate the reset button on the router to proceed with the reset.
All you need to do is press the reset button and hold it.
After some time, you can release the button, when you see a red light.
The reset is successful and all factory default settings are back.

These are some effective methods you can use to fix the Linksys router not connecting issue. Now, the router should be working well and you shouldn’t be facing any issues. We hope you understood how to add Linksys mesh router to your network. If you require assistance with anything else, you can connect with our team.