A dual-band system that connects with an existing Velop Tri-Band and is fast and easy to set up is the Linksys Velop Intelligent Mesh WiFi System. You can maximize your internet consumption with better Wi-Fi. You get excellent Wi-Fi anywhere from Velop. In this blog, we will teach you about Linksys velop system setup, how to access Linksys velop, and further accessing velop without the mobile app. Stay tuned!
Steps For Installing Linksys Velop:
1. Get the Linksys app now. To set up Velop, you require this app.
2. Search for Linksys in the app store on your device.
3. Install the app, launch it, and then adhere to the directions.
4. In order to use the app to see or modify your Velop system settings from any location with an internet connection, you must first create a Linksys Smart Wi-Fi account during installation.
5. Linksys Smart Wi-Fi allows you to do a wide range of tasks.
6. Change your Wi-Fi name and password.
7. Enable guest access.
8. Connect devices to Wi-Fi using WPS
9. Enable parental controls to block internet access
10. Test the speed of your internet connection.
Note: This will give you a verification email during setup. The email’s link should be clicked using your home network.
The only thing left to do throughout the app-based setup procedure is to connect the power and network cables. Once connected, make your Wi-Fi more distinctive by giving it a name and password using the app. You may also assign nodes names depending on their locations so that they can be recognized in the unusual event that anything requires attention.
Linksys Velop System Presets
Through the Linksys app, you can check or change the Velop system settings to improve the security of your Wi-Fi or the performance of a device or game. Anywhere in the globe that you have an internet connection, you may access settings. If not, you may still use your local network to access your Velop system.
- Enter the login information for your Linksys Smart Wi-Fi cloud account.
- Open the Linksys app first.
- Enter the email address you used to register.
- Type your password for the account.
- Select Log in.
This is how the Linksys velop system setup works. Now we will see how to access Linksys velop:
- Connect your laptop or computer to your network via a cable. or use your wireless network instead.
- The use of a cable connected to the Linksys Velop (WHW03) router is advised for making the connection. That will stop you from disconnecting in the midst of the setup or configuration procedure.
- You may access the login page by opening a web browser of your choice and entering the IP address of your Velop (WHW03) router in the address bar. The router’s back bears the IP address.
- You may now access your router’s admin panel by using the default username and password. Please feel free to check up on some of the default usernames and passwords for Linksys Velop (WHW03) routers if you are unaware of your username and password.
If, by chance, the app became stuck when you were configuring your Linksys device. Without the Linksys App, you can still finish your setup, so do not fear. To finish your setup, follow the steps listed below.
Accessing Linksys Velop System Without The Mobile App?
Your modem or router must first be linked to the Linksys Velop.
- Connect your PC to the Linksys Velop network after that.
- Launch your browser after that, put http://myrouter.local into the Web Link field, and then click the “Enter” key on your keyboard. This will bring up a new screen with instructions for replacing the site URLs you need to update.
- You must then log in by using “admin” for both your username and password and clicking “Login.”
- Following a successful login, choose “Setup Node” and provide your own “SSID and Password.”
- Select “I’m Done Adding Node” once you have configured your Nodes.
- Now open the wifi settings on your pc. Search for the Linksys Velop’s SSID that you just set up.
- Next, open your browser on your PC and enter the address http://myrouter.local. Next, click “Enter.”
- Then, on the following screen, click the “Velop Logo” and enter the default password for your router.
- Now look in the bottom-right corner of your screen; there should be a CA link there. Click it.
- Go to “Connectivity” on the next page.
- Go to the “Velop Setup” after that. The network name and passkey will be configured there. Therefore, enter the password and your desired SSID with caution.
- To proceed, you must choose “Setup Node.”
For more information on Linksys velop system setup or any of the things mentioned above, feel free to get in touch with us.